PC1600 Patch for editing ES1-Software-Synthesizer from Logic from Thomas Strunden, Seeheim(Germany) Fader 1: Switches to OSC-Pulse varying width Fader 2: balancing level from OSC and Sub-OSC Fader 3: changes LFO-Rate Fader 4: Changes filter-cutoff-frequency Fader 5: Changes filter-resonance Fader 6: Changes filter-drive Fader 7: Changes filter-keyfollow Fader 8: Changes low-level of ADSR via Vel Fader 9: Changes high-level of ADSR via Vel Fader 10: Changes envelope-attack Fader 11: Changes envelope-decay Fader 12: Changes envelope-sustain Fader 13: Changes envelope-release Fader 14: Changes envelope-form Fader 15: Changes low-level of envelope-moulation via velocity Fader 16: Changes high-level of envelope-moulation via velocity Button 1: Switches between OSC-Wave saw and triangle Button 2: Filtermodus 12db Button 3: Filtermodus 18db Button 4: Filtermodus 24db classic Button 5: Filtermodus 24db fat Button 6: AGateR Button 7: ADSR Button 8: GateR Button 9: LFO-wave tri Button 10: LFO-wave saw down Button 11: LFO-wave saw up Button 12: LFO-wave square Button 13: LFO-wave S&H Button 14: LFO-wave random Button 15: LFO ext Button 16: none Following functions of ES1 are not supported by this patch: waveforms of Sub-OSC, glide, Int via Wheel (LFO), all functions of the router matrix and the levels of amplifier and also functions only available in controls-appearance. My experience is, that these are functions not often modified when programming ES1- patches. If somebody is interested to programm these functions, here the controlermap: glide #65 Sub-OSC #81 fusslage #82 router env #88 router LFO #89 int via wheel low #91 int via wheel high #92 analog feel #93 bender range #94 Volume #95 Number of voices #96 All controler-values are starting with zero, for most sliders the high-level-value is 100, in some cases 127, try it. If somebody is interested, i also could make an environment for ES1 by switching all knobs by program- changes, so that the routers can be included in one patch ... for example.