Hi! 
This 12Channel_PulsarMixer_Pc1600x.zip contains 9 presets for PC1600x, to control PulsarMixer. It
uses ALL available CC# on one channel: 120! 
You'll be able to control, for 12 channels (mono or stereo): 
Volume, 
Pan, 
all 6 Aux Sends, 
Master Volume, Master inserts switches, 'Show Channels' switch, 
Bus Levels, Bus Mix Switch On/off, 
... 
The bus level and mix swithes I couldn't assign on my Pulsar Mixer, but they're there and use
CC#112-120 or so, the top range.
Because every preset was only 12 basic faders, I added 2 xtra's on every preset: 
13 will contain a Masterfader for faders 1-12 ...nice huh, that's for every goup (volume or aux send1
or ...) full control under one single fader! 
Fader 16 of every preset (except Master preset) wil repeat main Mix volume. 
Uploading these encourages the use of remote control. Remote control offers new perspectives in
creative music engineering. 
If Creamware gave only me more midi channels for large devices as Mixers including their inserts, I
wouldn't touch my mouse no more. My whole DAW is now remote controlled, from FULL Rebirth automation
over Reason to VST. Most of Pulsar too, only the mixers and as such the fx are not so easy to control
because of limited CC#. 
I hope you enjoy the presets. It took me 2 hours to make, small effort compared to the advantage of
fast mixing you get now. I hope people will get inspired by this and help me make presets for remote
controling Pulsar devices. 
At www.defectiverecords.com, there's a whole user site about the PC1600(x), check it out if you have
such a machine!! It also contains links to pc-based editors for pc1600x. Fellow Pc1600(x) users,
don't hesitate to contact me about this  
atomic. 
i'm not affiliated with www.creamware.de or peavey.com.
at0mic@pandora.be