------------------
Using The Peavey pc1600x as a Roland MC 303 Bass Controller.

This is another setup for the Roland Groovebox.
It will work only on Midichannel 2 (most of the Rolandpreset - patterns work with "Bass" on channel 2)

Below is the description of the faders and buttons

Fader 01 - Cutoff
Fader 02 - Resonance
Fader 03 - Attack
Fader 04 - Decay
Fader 05 - Release
Fader 06 - Chorus Send Lvl
Fader 07 - Reverb Send Lvl
Fader 08 - Vibrato Rate
Fader 09 - Vibrato Depth
Fader 10 - Vibrato Delay
Fader 11 - Modulation
Fader 12 - Portamento Time
Fader 13 - Expression
Fader 14 - Pitchbend
Fader 15 - Pitchbend Sensitivity
Fader 16 - Volume

Most of the faders will send Sysex-Strings to your machine.

Button 01 - Lead TB 1
Button 02 - Lead TB 2
Button 03 - Lead TB 3
Button 04 - Wow TB
Button 05 - Normal TB
Button 06 - Distorted TB 1
Button 07 - Distorted TB 2
Button 08 - Acid TB 1
Button 09 - Acid TB 2
Button 10 - Acid TB 3
Button 11 - Acid TB 4
Button 12 - Chorus 3 / Feedback Chorus (corresponding with Fader 6 "Chorus Send Level")
Button 13 - Flanger / Short Delay (corresponding with Fader 6 "Chorus Send Level")
Button 14 - Hall 2 / Plate (corresponding with Fader 7 "Reverb Send Level")
Button 15 - Delay / Panning Delay (corresponding with Fader 7 "Reverb Send Level")
Button 16 - Normal Mode / Sound Modul

Button 1 to 11 are Programchange Buttons.
Button 12 to 16 are programmed with 2 Commands.
If you press button 12 the "Chorus 3" will be active.
Pressing button 12 one more time "Feedback Chorus" will be active.
Same procedures on button 13, 14, 15 and 16.

I´ve tested it in Soundmodule and Normal Mode with 
Cubasis VST2.0, Cubase 5.0 Demo and MidiOx

Start your sequencer. 
Set the MidiOut to the MC303 and the Midichannel to 2.
Select the Part 2 on the MC303.
Press play on MC303. Now you will slide the faders to edit the sound.

Or load a Midi - Pattern into your sequencer and play around with the faders and buttons.

Have fun ;-)

More Presets will following soon.

eMails are welcome!

ruediger.fuchs@t-online.de or ruediger@estepg.de

http://www.estepg.de