------------------ Using The Peavey pc1600x as a Roland MC 303 Drum Controller. This is another setup for the Roland Groovebox. It works only on Midichannel 10 (Drums) Below is the description of the faders and buttons Fader 01 - Cutoff Fader 02 - Resonance Fader 03 - Attack Fader 04 - Decay Fader 05 - Release Fader 06 - Chorus Send Lvl Fader 07 - Reverb Send Lvl Fader 08 - Vibrato Rate Fader 09 - Vibrato Depth Fader 10 - Vibrato Delay Fader 11 - Modulation Fader 12 - Portamento Time Fader 13 - Expression Fader 14 - Pitchbend Fader 15 - Pitchbend Sensitivity Fader 16 - Volume Most of the faders will send Sysex-Strings to your machine. Button 01 - TR909 Set Button 02 - TR808 Set Button 03 - CR78 Set Button 04 - Jazz Set Button 05 - Brush Set Button 06 - Jungle Set Button 07 - House Set Button 08 - Techno 1 Set Button 09 - Techno 2 Set Button 10 - Techno 3 Set Button 11 - Abstract Set Button 12 - HipHop Set Button 13 - (not programmed yet) Button 14 - (not programmed Yet) Button 15 - Sound Module Mode Button 16 - Normal Mode I´ve tested it in Soundmodule and Normal Mode with Cubasis VST2.0, Cubase 5.0 Demo and MidiOx Start your sequencer. Set the MidiOut to the MC303 and the Midichannel to 10. Select the Rythm-Part on the MC303. Press play on MC303. Now you will slide the faders to edit the sound. Or load a Drumpattern into your sequencer and play around with the faders. Have fun ;-) More Presets will following soon. eMails are welcome! ruediger.fuchs@t-online.de or ruediger@estepg.de http://www.estepg.de