24 PC1600x Presets to control devices on Creamware's Pulsar, 
Here's my preset list V2:
BigMixer on channel 15 (6 Pc1600x presets)
Dry-Wet Insert Rack 16
Mono Insert Rack ChOut
Vocoder 14
Moonizer 11 (4)
EDS8i 10 (2)
MiniScope 2 (4)
Inferno 3
Three-O-Three 3, (2)
Saturn 4
DubSub 7
EZsynth 8
You have to assign all the CC#'s to the Pulsar devices yourself, but I made it easy for you: I named 
and programmed every fader and button on a Peavey PC1600x. 
Clearly ordered, they will make your Pulsar's BigMixer, Effects and Synths alive while you record and
automate.  Be sure to select "Use device midi-channel" in the controller settings page of Pulsar!
Synths mostly assigned according to my Roland MC-505 frontpanel knobs. The rest -like mixers &
effects- are logically numbered.  
Pulsar will save your assignments in two ways: if you save the device (not clear if that's possible
in 3.1 yet), midi-implementation will be included.  Don't forget to back-up your devices first,
Pulsar will overwrite in order to save them!  You can save assigned devices in a place or include
midi-channel in name,...  
If you save a project, implementation will be saved within the project. No device-saving will be
required.  As far as I know that's the only way to save midi control in PulsarV3.1.
A lot of effects have no midi-in, but can be controlled when used as insert, for example in the Ins
Rack, BigMixer, Voco...  I didn't include these 'cause this very depends on your own setup.  You
could use the 'Aux xL-xR' to control other effects parameters or panning.  Edit these presets but
remember: My presets use lots of the available CC# to Pulsar, so you will have to be carefull not to
double-assign!  Save different mixer- & PC1600x settings as templates for different projects.
* * * * * * * * * * 
Some Preset descriptions:
These device's implementation can be found in another file- read that for detailed info, the others
are undocumented.  They will be self-explicatory though.
***   BigMixer Volumes:
This BigMixer Preset has 16 faders assigned to a midi CC#.  If you prefer to work with 'linked'
stereo pairs, you can control 16 stereo tracks.  Volume faders have a midi-range of 22-102, which is
-41dB - 0dB.  Pre-leveling them on your 'pre-amp' in the BigMixer will let you play them much
preciser and prevents overload.
Buttons send same CC# as fader, but acts like a -96dB/0dB switch.  Used as a mute button, this saves
me 16 CC#.
***   BigMixer Master:
MasterVolume and 6 Insert Send&Rtn Sends.  12 Aux Send, 1 Insert On/Off and EQ Switches on buttons. 
Adapt them to your setup, just rename the edited button, remove old assignment and reassign!
***   Aux Channel Send presets:
16 numbered
***
Aux Sends 16Stereo transmits 2 CC# at once, so they have to be assigned via Cubase to send one CC#
only.  Hint: record a fade, send CC# one by one.
***
MoonControls+LFO:
Here I assigned some basic Sys-ex for more advanced controls- like switch to LFO trigger source In3:
Turns on 'In3' and puts slider-selector to 'In Gate'.
Moonizer 4 EQ's:
Puts Freq-Q-Gain-Mod 4 times on your faders.  Tweak 'em!
These  Aux Sends are grouped in pairs, 2 CC# per fader via kinda sysex.  Assign them by sending the
CC# with a sequencer because Pulsar will only recognise the last CC# from the pair sent from your
PC1600x slider.  This was a way to assign the whole BigMixer to one preset of the Peavey.
***
Vocoder Preset:  All knobs on the faders, except for Chorus Speed.  11 ProgCh for presets and 2
Vocoder knobs on the buttons. Play on.
***
Inferno:  16 faders and some buttons, check them out.  Can also easily be used on other synths with
minor adjustments to Pc-1600x presets.
***
...
        *******
         O   0
           |
          \ /
           x
* * * * * * * * * * * * *
atomic.
jdknews@hotmail.com
PS: Check my Rebirth presets. All PC1600x controls named, includes Bank- & Pattern selection and step
recording!